5 Tips For Successful Screen Printing On Plastic Surfaces

Screen printing on plastic surfaces can be a tricky process, but with the right knowledge and techniques, you can achieve stunning results. Whether you’re a seasoned screen printer or just starting, these five tips will help you successfully print on plastic surfaces. From choosing the right ink to ensuring proper adhesion, we’ll cover everything you need to know to make your next screen printing project a success. Therefore, grab your favourite beverage and let’s get started!

Choose the Right Ink

You will want to choose an ink that is specifically formulated for use on plastic surfaces. Look for inks that are designed to have good adhesion to plastics and that cure quickly to prevent smudging or rubbing off. Additionally, it’s important to choose the right ink for your plastic printing project. Not all inks are compatible with plastic surfaces, and some will cause damage. Before starting your screen printing project, test out a few different inks on a scrap piece of plastic to see which ones work best. 

Prepare your Surface

Proper surface preparation is essential for successful screen printing on plastic. Make sure your plastic surface is clean and free of any dirt, dust, or oils before printing. You may need to use a special cleaning solution or solvent to thoroughly clean the e surface and ensure that the ink adheres properly.

Use the Right Screen Mesh

The mesh count of your screen will also play a role in the success of your print. For plastic surfaces, it’s best to use a higher mesh count. This will help you achieve sharp details and prevent ink from bleeding or smudging.

Test Prints

Before printing your final product, it’s always a good idea to do some test prints on similar materials. This will allow you to fine-tune your settings and ensure that the final print is exactly what you want. Use scraps of plastic or similar materials to test different ink types, mesh counts, and exposure times, and adjust as needed until you get the desired results.

Proper Curing

Once you’ve printed your design onto your plastic surface, it’s important to properly cure the ink to ensure it stays put. Follow the manufacturer’s instructions for curing time and temperature, and use a curing oven or heat gun if necessary. Proper curing will help prevent smudging or rubbing off, so don’t rush this step.

Prevent Damaging Conditions

To prevent damaging conditions while screen printing on plastic, take several precautionary steps. First and foremost, make sure your surface is perfectly clean before you begin printing – any residual debris can create problems down the road. Also, avoid using hot tools or excessive heat when printing.

Achieving successful screen printing on plastic surfaces can be a challenge, but these tips can help you achieve the results you’re looking for. By selecting the right ink, using proper curing techniques, and paying attention to details like mesh count, you can create high-quality prints that will last. Remember to experiment and adjust your process as needed to get the best results. With these tips in mind, you’ll be well on your way to successful screen printing on plastic surfaces.
Making moulds or other tools for use in producing plastic parts is known as plastic tooling manufacture. This entails employing specialised tools and processes to develop, prototype, and produce the tooling. Plastic injection moulding is a procedure used to create a variety of plastic products, from toys and household items to automotive and medical components. The manufacture of plastic tools is a crucial part of this process. To produce consistent and exact parts, the tooling must be of high quality and accuracy.